DINITROL 3431 is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. Suitable for most industrial short to medium term applications. For indoor or outdoor under cover conditions.

DINITROL 3641 A-80 is a wax for corrosion protection specially formulated with high dry matter content to reduce environmental pollution and health risks for on-line application.
The main properties are as follows:
- high dry matter content
- excellent long term corrosion protection
- good weather and wash-off resistance
- excellent penetration

DINITROL 3641 A-80 is designed for application in closed cavities as well as on open surfaces for the vehicle industry and aftermarket. The product is easy to apply and for that reason suitable for aftermarket and import plant applications. The thixotropic nature of the product ensures an evenly applied film in the required thickness and strength even at places which are not easy to reach. Due to the air-drying nature of the product an oven is not required for final curing.

DINITROL 3650 is designed for application in closed cavities, doors and other parts of vehicles. DINITROL 3650 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions.

DINITROL 3654-1 is designed for application in closed cavities as well as on open surfaces.
The product is suitable for use at manufacturing plants, PDIs, in Aftermarket operations and for component protection where a robust, strong and durable product is required.
DINITROL 3654-1 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions.

DINITROL 977 is a semi-transparent, waterbased liquid anti corrosion coating for the protection of cavity areas in cars, trucks, coaches and other objects or places where a rust preventative surface is needed. The product is water-repellent and has very good penetrating properties. After drying remains a wax coating which has a good temperature resistance up to ca.+120°C and is almost tack free. When dried DINITROL 977 is heated by sun or by engine-heat, it does not have the typical smell of conventional cavity-waxes.

DINITROL 1000 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for use at import plants, during truck and bus manufacture and in the aftermarket. DINITROL 1000 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions.

DINITROL PENETRANT LT is designed for application on open surfaces as well as in cavities, such as doors and other parts of cars, trucks and buses. DINITROL PENETRANT LT is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosive weather conditions.

DINITROL 479 is a thick corrosion preventative compound with a ”rubbery” consistency which forms a very hard, elastic, wear resistant protective film with extremely good sound damping properties. The product has high thixotropy, contains low aromatic solvent that do not attack paints, plastics and rubber parts of the car. The thick layer of coating has a heavy-duty structure, which looks like orange peel and absorbs very well outside road noise resonance from vibrations of vehicle parts as well as damps sound from stone chip and sand attacks. The product withstands heavy mechanical wear with excellent adhesion properties. DINITROL 479 is an approved alternative for wheel arches covers from plastic or felt. The product has good adhesion to painted and primed surfaces, original PVC and steel and ensures reliable protection from corrosion.
DINITROL 479 is designed as sound deadening and corrosion protective product for treatment of underbody components, like wheel arches, door sill plates of all kinds of vehicles, busses, trucks, trailers etc.

DINITROL 482 is a black universal corrosion preventative , giving the user the possibility to apply high film thickness. DINITROL 482 is wax/bitumen based and provides long-term corrosion prevention and abrasion resistance. After drying DINITROL 482 provides a though, elastic, black, waxy film with high wear resistance and good resistance to road salt.

Dekaphon 9735 is a durable protective coating with anti-corrosion properties. Dekaphon 9735 is an underbody protection system, especially designed for wooden floor panels used for the construction of caravans and campers or other recreational Vehicles. The product has excellent sound deadening effects and offers a durable protection to the chassis of, for instance, recreational vehicles, cars, trucks and coaches. After drying there remains a tough, adhesives film resistant against various climates and gravel.

DINITROL CAR/4941 Spray is an underbody product for use in treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product. A clean and economic treatment on the line is assured by the product's ease of application and high dry matter content. DINITROL CAR/4941 Spray is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environment. DINITROL CAR/4941 Spray is also very suitable as an anticorrosive coating for transport and
warehousing under extremely corrosive conditions.

DINITROL 4942 is an under-body product for treatment of vehicles during production, at import plants and in the after-market. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product.
A clean and economic treatment on the line is assured by easy application and high solid content. DINITROL 4942 is also designed to be used on spare parts, machines and iron and steel structures in highly corrosive environment. DINITROL 4942 is also very suitable as a transport and storage anti-corrosive for long-term transporting or warehousing under extreme corrosive circumstances.

DINITROL 3125 HS is a solvent borne rust preventative specially formulated, with a high dry matter content, to minimise environmental pollution and occupational exposure during on-line application. Main properties are as follows:
- High dry matter content
- Good film building properties
- No dripping

DINITROL 3125 HS is designed for application mainly as a cavity protection and a thin underbody coating. Main objects to be treated are used vehicles with some corrosion present. For improved performance on more corroded surfaces, DINITROL ML or DINITROL ML HS can be used as a pre-treatment. The slightly thixotropic nature of the product ensures an evenly applied film to the required thickness and strength.

kLine Premium Wax is a corrosion protection material with a waxy, touch dry film and excellent protective characteristics.
It is set thixotropic and can be processed dripless with the correct processing equipment.

DINITROL 77 B is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. DINITROL 77 B contains environmentally acceptable low aromatic solvents, which once evaporated leaves a thick, brown waxy film. DINITROL 77B is primarily designed for cavity protection but may also be used for storage, transport and underbody protection.

DINITROL 3850 is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. DINITROL 3850 contains environmentally acceptable low aromatic solvents, which onceevaporated leaves a thick, brown waxy film. DINITROL 3850 is primarily designed for cavity protection but may also be used for storage, transport and underbody protection.

DINITROL High Performance Wax is a brown, low viscous wax for application and corrosion preventative coating on vehicles such as trucks and busses but also for other objects where corrosion is a problem. The product is water repellent and high penetrating. Due to its waxy appearance, it also shows self-healing properties.
After drying, the film formed is resistant to temperature up to 180°C and this makes the product suitable also for applications in for example engine compartments. After drying the product does not show any odour problems when heated. DINITROL High Performance Wax is used for cavities in doors, engins hoods, members, re-inforcements etc. in all types of vehicles, machines and other equipment. The product is also highly suitable for applications in the following situations:

Car manufacturing
Bus manufacturing
Trailer manufacturing
Work shops
Body shops
Metal working industries
Ship yards

kLine K-Fluid A is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear. It A contains environmentally acceptable low aromatic solvents, which once evaporated leaves a thick, brown waxy film.
It A is primarily designed for cavity protection but may also be used for storage, transport and underbody protection. Due to the reduced viscosity, the product is easier to apply with e g simpler equipment and at lower temperatures.

Zingalufer is a moisture curing one pack polyurethane. Micaceous iron oxides create the special lamellar structure which create a very tight paint film for optimal barrier protection and corrosion resistance. Zingalufer is used as a sealer on ZINGA, as intermediate coat in a three layer ZINGA system.

Aquazinga is a two pack 100% water-based anti-corrosion system based on inorganic zinc silicates. Due to its high zinc content in the dry film (92%) it provides cathodic protection to ferrous metals. It can be used as a stand alone system as an alternative to hot-dip galvanisation or metallisation. Aquazinga has an excellent resistance to abrasion and is designed to withstand corrosive environments and severe conditions, including high temperatures (up to 600°C).

DINITROL 25 B is designed to protect metallic parts in the interim between different production operations and during limited periods of storage, in particular when the parts are wetted by e.g. rinsing water, cutting oil emulsions etc. DINITROL 25 B provides excellent corrosion protection indoors at extremely low film thickness.

On evaporation of the solvent, DINITROL 81 leaves a transparent, hard and waxy film, ideally suited as a protective coating, affording easy visual inspection of the metal surface, reading of labels, numbers, etc. DINITROL 81 is intended for protection, in storage and in transit, of finished surfaces of steel and of other metals, particularly when a colourless, transparent and smearless film is desired. DINITROL 81 may also be used for protection of lacquered surfaces withstanding white spiritand similar solvents, e.g. different types of tooling and equipment engines and vehicles.

DINITROL 485 is a quick drying corrosion protector and preservative. It is opalescent and dries to a non-sticky film. A smooth or coarse finish can be obtained depending on the method of application. It is recommended for use on panel overlaps, grooves and spot welding seams in the engine compartment; shock absorber mountings and water gutters.
Machine parts, equipment, garden and agricultural tools can be temporarily protected from rusting by using the Corrosion Protection Wax.
DINITROL 485 does not attack paints used on cars, adheres to nearly all base materials, is electrically non-conductive and odourless once the solvent has evaporated.

DINITROL 970 has a wide range of use in most fields of corrosion protection. However, the objects to be treated must be free from dirt, oil and grease. DINITROL 970 is excellent for corrosion protection between production operations, during transportation and storage, indoors or in a cold warehouse. DINITROL 970 is designed for protection of smooth steel surfaces and objects such as engines, engine details, spare parts, etc. Since DINITROL 970 is water-based the product can be used also for protection of damp objects exposed to rinsing water, emulsions, etc.

DINITROL 4010 leaves a hard, transparent film that is resistant to both alkali and acids. DINITROL 4010 is heat resistant up to a temperature of more than 200°C.
DINITROL 4010 has a shiny and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.
The adhesion and flexibility on rubber and plastic parts at both low and high temperatures are very good. Appropriate parts to be treated with DINITROL 4010 are engine compartments, engines and other parts which have to withstand high temperatures.

DINITROL L142 protects the painted metal from UV-radiation, aggressive chemicals and atmospheric pollution, during transport and storage.
Even after one year in heavy conditions, the film is easily removable with an organic degreaser. DINITROL L142 does not affect other details commonly used on cars, such as rubber, plastics and aluminium. DINITROL L142 has low aromatic content. The product dries in minutes, easily withstanding rain or water splashing.
DINITROL L142 is designed for protection of newly painted cars or other similar painted surfaces. DINITROL L142 can also be used on areas in need of temporary corrosion protection.

DINITROL L142 protects the painted metal from UV-radiation, aggressive chemicals and atmospheric pollution, during transport and storage.
Even after one year in heavy conditions, the film is easily removable with an organic degreaser. DINITROL L142 does not affect other details commonly used on cars, such as rubber, Plastics and aluminium. DINITROL L142 has low aromatic content. The product dries in minutes, easily withstanding rain or water splashing.
DINITROL L142 is designed for protection of newly painted cars or other similar painted

DINITROL 4010 leaves a hard, transparent film that is resistant to both alkali and acids. DINITROL 4010 is heat resistant up to a temperature of more than 200°C.
DINITROL 4010 has a shiny and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.
The adhesion and flexibility on rubber and plastic parts at both low and high temperatures are very good.
Appropriate parts to be treated with DINITROL 4010 are engine compartments, engines and other parts which have to withstand high temperatures.

Wax Remover for the quick removal of preservation wax on paraffin base. Dries faster than traditional dewaxer.

The Film Galvanising System ZINGA is a one pack coating that contains 96% zinc in the dry film and provides cathodic protection of ferrous metals. It can be used as a unique system as an alternative to hot-dip galvanisation or metallisation, as primer in a duplex system (active + passive) or as a recharging system for hot-dip galvanisation, metallisation or zinganised surfaces. It can be applied by brushing, rolling or spraying on a clean and rough substrate in a wide range of atmospheric circumstances. ZINGA is also available as an aerosol and is sold as Zingaspray.