Flexible nozzle , 2 m long and with a nozzle with a spray angle of 360 ° for cavity protection.

Straight nozzle , 80 cm long and with a nozzle with a spray angle of 180 ° for cavity protection .

Hook nozzle with a nozzle ( spray angle 15 ° ) for cavity protection .

Hook nozzle for treating subfloors.

Lever cylinder pump manually . Suitable for cavity protection products in order to pump it from a 60 l or 208 l drums .

Professional hot wax application system without pump . Consisting of 8 m high-pressure hose , Z - rotation member , gun and clutch . Prevents an excessive spray . Suitable for the processing of 60 l and 208 l drums .

For airless pump 1:26

Professional cavity pressure spray gun with standard compressed air connection and check valve . Capacity 1 l . With a control valve , the amount of material can be accurately determined . By adding air to the spray a very fine atomization of the spray is performed ( seal kit Article Number 1700650 ) . For processing cavity protection products incl . 1 pc . Hook probe and 1 pc . Flex probe 360 ° .

Plug-in coupling for gun airless pump

Spare Airlesssystem

1 m flexible hose between the gun and probe.

Gun for Airlesspump 1:26

The hose recoiler are extremely robust and are distinguished by their compact design . Both the material combination axis / bearing as well as the springs are maintenance-free . Suitable for ceiling mounting . Very easy to install , since the weight of the hose reel during assembly must not be kept . Used in corrosion protection stations where the barrel pump is not directly at the processing . 400 bar .

Flexible nylon nozzle with 360 ° nozzle . For processing cavity preservation products in spray cans . Suitable for curved and narrow cavities ( 60 cm long ).

Structure gun for processing 1 liter cans , the structure spraying of underbody and stone chip protection .

Sealing plugs for sealing holes preservatives.

drum insert

Double flexible joint between the hose and gun . For airless pump.

Dekaseal 8936 is a high performance polyisobutene (PIB) based sealant and is a permanent, slightly sticky, non-hardening synthetic sealant, which can be lightly dabbed away, but cannot be painted over.

Dekaseal 8869 is a single component, plastic-elastic butyl based sealing compound which can be painted over.

Dekasyl MS-5 is a MS Polymer based adhesive with a high green strength and is suitable for making elastic constructive joints. Due to its high green strength clamping times can often be reduced or clamps are not needed anymore. Dekasyl MS-5 can also be used as sealant, if similar material (similar stiffenesses) are joined together, or if mechanical fastening methods are used.

Dekasyl MS-2 is a good compromise between an adhesive and a sealant. Dekasyl MS-2 is suitable for making elastic constructive joints, which also require a high strength. Dekasyl MS-2 is based on MS Polymer.

DINITROL 401 is a solvent and rubber-based, air-drying and permanently elastic 1-c filler for brush and spatula application.
For bodywork and lacquer work, DINITROL 401 can be used on untreated and primed bodywork, and on surfaces with paint primer and lacquers. After complete drying, the sealing compound can be coated using 1-c and 2-c repair lacquer. In order to ensure permanent sealing of horizontal and vertical welding seams on car bodywork,
i.e. in the engine compartment, boot base and spoilers to create technically and optically similar sealing to the original. Also suitable for sealing large areas on trailers or large threaded joints.

DINITROL 410 UV is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening.

We recommend carrying out an adhesion test before applying to complex substrates.commercial vehicle construction.It is suitable for sealing overlapping and expansion joints in visible interior and exterior areas inand lacquered metals, duroplastics (glass fibre reinforced plastics, hard PVC), wood and glass.trucks and caravan construction and shipbuilding. The material adheres well to primedDINITROL 410 UV is used for bonding and sealing in a range of industrial areas, such as bus,

DINITROL 410 UV is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. 2-C acrylic lacquers can be applied in a wet-on-wet process. Paints containing alcohol and alkyd resin impair hardening.

DINITROL 410 UV is used for bonding and sealing in a range of industrial areas, such as bus, trucks and caravan construction and shipbuilding. The material adheres well to primed and lacquered metals, duroplastics (glass fibre reinforced plastics, hard PVC), wood and glass. It is suitable for sealing overlapping and expansion joints in visible interior and exterior areas incommercial vehicle construction.

We recommend carrying out an adhesion test before applying to complex substrates

DINITROL 460 is a permanently elastic, UV-resistant sealing compound with a high solid matter content and rubber parts.dry, the sealer is permanently elastic and does not become brittle. It is not harmful to chromium, paintsas a sealant between rubber profiles and bodywork joints, in addition to sealing glass sunroofs. Oncefor vehicle repair. Ideal for sealing non-bonded vehicle windows. DINITROL 460 can also be used.

DINITROL 750 is a 1-component sprayable seam sealer which hardens upon contact with air humidity. With a special compressed air gun, the original surface structure can be reproduced.

Product description High Teck is a high quality, strong one component adhesive with very high grip based on MS Polymer. That is why support of the adhesive assembly is not necessary in general. The product is odourless, neutral and free of silicone and isocyanides. After application the High Tech cures rubber seal.with atmospheric moisture to form a durable.

is a high quality, strong one component adhesive/sealant base on MS polymer. The product is odourless, neutral and free of isocyanates.
After application kLine MS Power Seal cures with atmospheric moisture to form a durable rubber seal.

DINITROL 501 FC-HM is a humidity-curing and one component polyurethane for the direct-glazing of automotive glasses. The adhesive DINITROL 501 FC-HM includes the following properties:
• good adhesion on paints
• fast curing and high modulus
• low odour
• excellent working characteristics
• very good standing properties
• short cut-off string
• high elasticity
• solvent and PVC free
• OEM approved
• ageing and weather resistant
• Crash test approved acc. FMVSS 212
Together with the corresponding pre-treatments as for example primers and/or activators, DINITROL 501 FC-HM is designed for the use in replacing polyurethane direct-glazed automotive glass parts and other bondings in vehicle manufacturing. The adhesive’s high modulus property contributes remarkably to the stiffening increase of the car-body.